CCNA Interview Questions with Answers
Q.1: What is Routing?
Ans:
Routing is the process of finding a path on which data can pass from
source to destination. Routing is done by a device called routers, which
are network layer devices.
Q.2: What is the purpose of the Data Link?
Ans:
The job of the Data Link layer is to check messages are sent to the
right device. Another function of this layer is framing.
Q.3: What is the key advantage of using switches?
Ans:
When a switch receives a signal, it creates a frame out of the bits
that was extracted from that signal. With this process, it gains access
and reads the destination address, after which it forwards that frame to
the appropriate port. This is a very efficient means of data
transmission, instead of broadcasting it on all ports.
Q.4: When does network congestion occur?
Ans:
Network congestion occurs when too many users are trying to use the
same bandwidth. This is especially true in big networks that do not
resort to network segmentation.
Q.5: What is a Window in networking terms?
Ans:
A Window refers to the number of segments that is allowed to be sent
from source to destination before an acknowledgement is sent back.
Q.6: Does a bridge divide a network into smaller segments?
Ans:
Not really. What a bridge actually does is to take the large network
and filter it, without changing the size of the network.
Q.7: Which LAN switching method is used in CISCO Catalyst 5000?
Ans:
This model uses the Store-and-forward switching method. It stores the
entire frame to its buffers and performs a crc check before deciding
whether or not to forward that data frame.
Q.8: What is the role of the LLC sublayer?
Ans:
The LLC sublayer, short for Logical Link Control, can provide optional
services to an application developer. One option is to provide flow
control to the Network layer by using stop/start codes. The LLC can also
provide error correction.
Q.9: How does RIP differ from IGRP?
Ans:
RIP relies on the number of hops in order to determine the best route
to a network. On the other hand, IGRP takes consideration many factors
before it decides the best route to take, such as bandwidth,
reliability, MTU and hop count.
Q.10: What are the different memories used in a CISCO router?
Ans: - NVRAM stores the startup configuration file
- DRAM stores the configuration file that is being executed
- Flash Memory – stores the Cisco IOS.
Q.11: What is BootP?
Ans:
BootP is a protocol that is used to boot diskless workstations that are
connected to the network. It is short for Boot Program. Diskless
workstations also use BootP in order to determine its own IP address as
well as the IP address of the server PC.
Q.12: What is the function of the Application Layer in networking?
Ans:
Application Layer supports the communication components of an
application and provides network services to application processes that
span beyond the OSI reference model specifications. It also synchronizes
applications on the server and client.
Q.13: Differentiate User Mode from Privileged Mode
Ans:
User Mode is used for regular task when using a CISCO router, such as
to view system information, connecting to remote devices, and checking
the status of the router. On the other hand, privileged mode includes
all options that are available for User Mode, plus more. You can use
this mode in order to make configurations on the router, including
making tests and debugging.
Q.14: What is 100BaseFX?
Ans:
This is Ethernet that makes use of fiber optic cable as the main
transmission medium. The 100 stands for 100Mbps, which is the data
speed.
Q.15: Differentiate full-duplex from half-duplex.
Ans:
In full-duplex, both the transmitting device and the receiving device
can communicate simultaneously, that is, both can be transmitting and
receiving at the same time. In the case of half-duplex, a device cannot
receive while it is transmitting, and vice versa.
Q.16: What is MTU?
Ans:
MTU stands for Maximum Transmission Unit. It refers to the maximum
packet size that can be sent out onto the data line without the need to
fragment it.
Q.17: How does cut-through LAN switching work?
Ans:
In Cut-Through LAN switching, as soon as the router receives the data
frame, it will immediately send it out again and forward it to the next
network segment after reading the destination address.
Q.18: What is latency?
Ans:
Latency is the amount of time delay that measures the point from which a
network device receives a data frame to the time it sends it out again
towards another network segment.
Q.19: Utilizing RIP, what is the limit when it comes to number of hops?
Ans: The maximum limit is 15 hop counts. Anything higher than 15 indicates that the network is considered unreachable.
Q.20: What is a Frame Relay?
Ans:
Frame Relay is a WAN protocol that provides connection-oriented
communication by creating and maintaining virtual circuits. It has a
high performance rating and operates at the Data Link and Physical
Layers.
Q.21: How do you configure a Cisco router to route IPX?
Ans:
The initial thing to do is to enable IPX routing by using the “ipx
routing” command. Each interface that is used in the IPX network is then
configured with a network number and encapsulation method.
Q.22: What are the different IPX access lists?
Ans:
There are two access lists: Standard and Extended. Standard Access List
can only filter the source or destination IP address. An Extended
Access List uses the source and destination IP addresses, port, socket
and protocol when filtering a network.
Q.23: Explain the benefits of VLANs.
Ans:
VLANs allow the creation of collision domains by groups other than just
physical location. Using VLANs, it is possible to establish networks by
different means, such as by function, type of hardware, protocol, among
others. This is a big advantage when compared to conventional LANs
wherein collision domains are always tied to physical location.
Q.24: What is subnetting?
Ans:
Subnetting is the process of creating smaller networks from a big
parent network. Being a part of a network, each subnet is assigned some
additional parameters or identifier to indicate its subnet number.
25) What are the advantages of a layered model in the networking industry?
Ans:
A layered network offers many advantages. It allows administrators to
make changes in one layer without the need to make changes in the other
layers. Specialization is encouraged, allowing the network industry to
make progress faster. A layered model also lets administrators
troubleshoot problems more efficiently.
Q.26: Why is UDP lease favored when compared to TCP?
Ans: It’s because UDP is unreliable and unsequenced. It is not capable of establishing virtual circuits and acknowledgements.
Q.27: What are some standards supported by the Presentation layer?
Ans:
Presentation layer supports many standards, which ensures that data is
presented correctly. These include PICT, TIFF and JPEG for graphics,
MIDI, MPEG and QuickTime for Video/Audio.
Q.28: What’s the simplest way to remotely configure a router?
Ans:
In cases when you need to configure a router remotely, the most
convenient is to use the Cisco Auto Install Procedure. However, the
router must be connected to the WAN or LAN through one of the
interfaces.
Q.29: What does the show protocol display?
Ans:
- routed protocols that is configured on the router
- the address assigned on each interface
- the encapsulation method that was configured on each interface
Q.30: How do you depict an IP address?
Ans: It can be done in three possible ways:
- using Dotted-decimal. For example: 192.168.0.1
- using Binary. For example: 10000010.00111011.01110010.01110011
- using Hexadecimal. For example: 82 1E 10 A1
Q.31: How do you go to privileged mode? How do you switch back to user mode?
Ans:
To access privileged mode, you enter the command “enable” on the
prompt. In order to get back to user mode, enter the command “disable”
Q.32: What is HDLC?
Ans:
HDLC is short for High Level Data Link Control protocol, and is a
propriety protocol of CISCO. It is the default encapsulation operated
within CISCO routers.
Q.33: How are internetworks created?
Ans:
Internetworks are created when networks are connected using routers.
Specifically, the network administrator assigns a logical address to
every network that connects to the router.
Q.34: What is Bandwidth?
Ans:
Bandwidth refers to the transmission capacity of a medium. It is a
measure of how much volume a transmission channel can handle, and is
measured in Kbps.
Q.35: How does Hold-downs work?
Ans:
Hold-downs prevent regular update messages from reinstating a downed
link by removing that link from update messages. It uses triggered
updates to reset the hold-down timer.
Q.36: What are packets?
Ans:
Packets are the results of data encapsulation. These are data that has
been wrapped under the different protocols of the OSI layers. Packets
are also referred to as datagrams.
Q.37: What are segments?
Ans:
Segments are sections of a data stream that comes from the upper OSI
layers and ready for transmission towards the network. Segments are the
logic units at the Transport Layer.
Q.38: Give some benefits of LAN switching.
Ans:
- allows full duplex data transmission and reception
- media rate adaption
- easy and efficient migration
Q.39: What is Route Poisoning?
Ans:
Route Poisoning is the process of inserting a table entry of 16 to a
route, making it unreachable. This technique is used in order to prevent
problems caused by inconsistent updates on a route.
Q.40: How do you find valid hosts in a subnet?
Ans:
The best way to go about this is to use the equation 256 minus the
subnet mask. The hosts that are considered valid are those that can be
found between the subnets.
Q.41: What is DLCI?
Ans:
DLCI, or Data Link Connection Identifiers, are normally assigned by a
frame relay service provider in order to uniquely identify each virtual
circuit that exists on the network.
Q.42: Brielfly explain the conversion steps in data encapsulation.
Ans:
From a data transmitter’s point of reference, data from the end user is
converted to segments. Segments are then passed on to the other layers
and converted into packets or datagrams. These packets are then
converted into frames before passing on to the network interface.
Finally, frames are converted to bits prior to actual data transmission.
Q.43: What are the different types of passwords used in securing a CISCO router?
Ans:
There are actually five types of passwords that can be used. These are
enable secret, enable, virtual terminal, console, and auxiliary.
Q.44: Why is network segmentation a good idea when managing a large network?
Ans:
For a network administration, segmenting a network would help ease
network traffic and ensures that high bandwidth is made available at all
times for all users. This translates to better performance especially
for a growing network.
Q.45: What causes a triggered update to reset the router hold-down timer?
Ans:
This may happen when the hold-down timer has already expired, or when
the router received a processing task that incidentally was proportional
to the number of links in the internetwork.
EmoticonEmoticon